FlooringInc Eco Soft + Baby Soft Jigsaw Play Tiles, 2'x2', Multi Packs

Description

WELCOME TO THE OFFICIAL FLOORINGINC EBAY STORE
SAVE 30% OFF TODAY
Eco Soft+ Foam Tiles
Product Specification  (per tile)
Thickness: ~11mm
Size: 2' x 2'
Weight: 1.00 Lb
Material: Closed cell EVA foam
Recommended Uses
Basements
Kid's Playroom
Light duty home gym flooring
Temporary portable flooring
Trade show flooring
Child care facilities
Our Eco-Soft + tiles are a premium version of our Eco-Soft Tiles. Thicker and more consistent, these foam tiles are the perfect light weight foam flooring option for any room in your home. Each tile features two removable edge pieces and is resistant to water, mold and mildew growth. Since these interlocking tiles are made with closed celled EVA foam, they are very insulating making them great for any basement or enclosed patio. These soft tiles are 100% free of any allergens or latex.
Note: These tiles are made of foam may have some color variation. Also, our Foam products can be punctured by sharp animal nails, rough use, high heels, and moving furniture.
Material:
Closed cell EVA foam
Size:
2' x 2'
Weight:
1.00 Lb. per tile
Recommended Uses:
Eco-Soft + tiles have been installed successfully in basements, kid's playrooms, as light duty home gym flooring, as temporary portable flooring, in bedrooms, as trade show flooring, in child care facilities, and anywhere a soft foam flooring surface is desired.
Maintenance:
Eco-Soft + tiles are easy to maintain. Due to the interlocking tiles being constructed of durable closed cell EVA foam, no liquids can penetrate the surface of the puzzle tiles
If the soft tiles do get something spilled on them or appear dirty, all that is required to clean them is to do a quick wipe of the foam tiles with a damp cloth and your soft tiles will look like new.
Installation:
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
First, clean your sub floor so it is free of all dirt, grease or debris.
Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note:
When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.