-40%
(pack) Rod Sealing U-ring K25 NBR/METAL ID 020mm-190mm (choose dimensions)

(pack) Rod Sealing U-ring K25 NBR/METAL ID 020mm-190mm (choose dimensions)

$ 0.87

Availability: 24400 in stock
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • MPN: Does Not Apply
  • Restocking Fee: No
  • Brand: Unbranded/Generic
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Condition: New

    Description

    K25 is a double acting complete piston seal which consists of a steel plate vulcanized with elastomeric nitrile rubber using special production methods.
    PRODUCT ADVANTAGES
    • Ready to fit complete piston
    • Wide range of dimensions
    • Low friction and smooth running due to sealing lip geometry
    • Easily fastened to the piston rod without using additional sealing elements
    • Long service life
    • Economical sealing solution
    APPLICATION
    Iron and aluminum pneumatic cylinders.
    MATERIAL
    CODE
    NBR
    75 SHORE A
    NB
    7501
    STEEL
    ST37
    FE
    9901
    MEDIA
    Prepared , dried and de-oiled compressed air
    TEMPERATURE
    -30°C +105°C
    PRESSURE
    ≤16 Bar
    SPEED
    ≤1.0 m/sn
    Note: The above data are maximum values and cannot be used at the same time.
    SURFACE ROUGHNESS
    Rmax
    Sliding Surface  ØD
    ≤0.4 μm
    ≤3.2 μm
    INSTALLATION
    K25 is pushed onto the piston rod on the clamping flange towards the rod and fixed by fastening. The nut has to be secured. The sliding surface and the cylinder bore should be oiled with oil that must not go into the reaction with the sealing element during the installation process. Special precautions has to be taken at the end of the stokes to avoid damaging of the sealing lips.
    NOTES
    For special applications that require high temperatures , K25 can be produced in FKM material.